Description
You get Huge savings when you purchase the Fostex TH-900 and AE by Cary Audio Night Hawk Headphone Amplidier.
Fostex TH-900 Headphones
The TH-900 is the first high-end headphones form Fostex featuring the newly designed driver unit with1.5 tesla (15,000 gauss) magnetic circuit and bio-dynamic 50mm diaphragm, traditional Japanese lacquered "Urushi" finished craftsmanship housing and selected 7N OFC cable. All coming together to achieve the sonic goal of a wider stereo field, high resolution and transparent reproduction.
AE by Cary Audio Nighthawk
The Nighthawk Headphone Amplifier is an all solid-state design, based on a new monolithic JFET device with exceptional sonic qualities. The combination of a well-designed front end and this Class A discrete complementary output stage yields tremendous speed and bandwidth for very accurate musical reproduction.
The power supply is again designed with very low noise and over-spec’d parts to be optimized for superb audio performance. All internal components of the Nighthawk Headphone Amplifier are thus optimized to maximize sonic potential and exhibit Audio Electronics sonic signature, which does not sound like typical solid-state equipment.
TH-900 Features
- Unique designed Neodymium magnetic circuit adopting the magnetic repulsion system with the 1.5 tesla (15,000 gauss) magnetic flux density to achieve wider dynamic range
- Foster / Fostex's unique "Biodyna" diaphragm* for fine and high resolu-tion sound reproduction
- The housings are made of Japanese Cherry Birch (Betula Grossa), the Japanese specialty with rigid and dense texture for maximum acoustic performance
- The housings are finished by the traditional "Urushi" lacquer (a.k.a. Japan) by a 100 years old artisan group. The finish used for the TH-900 is called "Bordeaux" and is simply stunning
- Platinum foiled "Fostex" logo on the housings
- The ear pads are made of protein leather made from eggshell membrane for maximum confort
- The cord is made of 7N grade (99.99999%) OFC (Oxygen Free Copper) and duralumin plug case for higher durability
- Comes with an elegant headphone stand in the package
Nighthawk Features
- Solid state design with new monolithic JFET output stage
- Discrete Class-A output stage
- Simple to connect and operate, featuring a pair of RCA input jacks and a loop-through output pair
- Power switch and volume control included
- Fully regulated discrete power supply for the best sound quality
- Machined black anodized aluminum front panel with textured black steel chassis standard
- Please Note: We only supply 230V @ 50Hz version
Specifictations
| TH-900 | |
| Type: | Dynamic, Closed design |
| Driver: | 50mm dia Nd magnet |
| Impedance: | 25 ohm |
| Sensitivity: | 100dB / mW |
| Maximum Input: | 1,800 mW |
| Reproduction Frequency: | 5 – 45k Hz |
| Weight: | 400g (excluding the cord) |
| Cord: | 3m Y type 7N-OFC |
| Plug: | 6.3mm dia gold coating stereo phone plug |
| Accessory: | Headphone stand High Quality Storage box |
| Nighthawk | |
| Circuit Type: | Solid state headphone amplifier |
| Input Impedance: | 50K ohms |
| Gain: | 20dB |
| Sensitivity: | 5Hz to 35 kHz (-1dB) |
| Signal to Noise Ratio: | >90dB at 0dB gain |
| THD: | <0.01% |
| Channel Separation: | 400g (excluding the cord) |
| Output Power: | 400mW/300 Ohms 600mW/30 Ohms |
| Output Impedance: | 5 ohms |
| Full Regulated Power Supply: | Discreet regulators for audio circuits |
| Headphone Connector: | 1 x phone jack |
| RCA Connectors: | 4 x gold plated 1 set for input and other used as pass through |
| AC Cord: | 3 Conductor, Detachable |
| AC Power Requirements: | 234 VAC @ 50 Hz |
| Finish: | Machined black anodized aluminum front panel with textured black steel chassis standard |
| Weight: | 4.5 Kg |
| Dimensions: | 10.16cm H x 21.60cm W x 36.83cm D |
* Specifications subject to change without notice
